دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

n: any small device that, when brought into contact with or inserted into a system, can make measurements on that system. In corrosion, probes can measure electrical potential or the corrosivity of various substances to determine a systems corrosive tendencies.

n: a steering tool device that id lowered on the end of a conductor line to fit inside the orienting sub.

total gas (solution + free) production divided by the oil production volume. Excludes gas lift gas.

n: any of a wide variety of lease fonDS used in the midcontinent and Gulf regions.

n: the efforts made to minimize the decline in a wells production. It includes, for example, acidwashing of casing perforations to dissolve mineral deposits, scraping or chemical injection to prevent paraffin ooildup, and vari- ous measures taken to control corrosion and erosion damage.

the operations necessary to optimize recovery and keep production as high as practical.

production fluid enters the valve and acts on the effective bellows area, compressing the bellows against the precharge pressure, lifting the needle off the seat and opening the valve. The injection gas then flows through the seat, through the reverse-flo

a vessel through which production passes and the multi-phase fluids are broken and separated.

the valve on the flow cross that controls the exit point as produced fluids flow from the tree.

n: (PI) the curve on a graph that results when the volume of a wells production is plotted against time. The curve is used to evaluate a wells perfonnance when it has single-phase flow.