دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

the change in pulsed neutron capture created by acidizing a carbonate. Acidizing increases interconnected porosity and strands chlorides and other ions in the rock.

chemical analysis of the acid concentration and other chemical and physical measurements in the returning acid.

v: to part or open fractures in productive hard limestone formations by using a combination of oil and acid or water and acid under high pressure. See formation fracturing.

to fracture stimulate a formation by injecting the acid over the parting pressure of the rock and using the acid to etch channels in the fracture face.

n: a gas that forms an acid when mixed with water. In petroleum production and processing, the most common acid gases are hydrogen sulphide and carbon dioxide. Both cause corrosion, and hydrogen sulphide is very poisonous.

n: The mixture made by gas and water presents acidity. The gas is acid gas. The usual acid gases are hydrogen sulphide and carbon dioxide in oil and gas drilling. Both of them are acrid and hydrogen sulphide is very toxic.


any produced gas, primarily H2S and CO2 that form an acid when produced in water.

v: The natural gas which is consisted of a number of hydrogen sulphide and carbon dioxide kick

acid corrosion inhibitor. Slows the acid attack on metal.

n: material of high specific gravity formed during the chemical refining treatment of oils by sulphuric acid and usually separable by settling or centrifuging. Also called acid tar.

the percent by weight loss of exposing a sample of material to an excess of acid.