دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

Conservation of Clean Air and Water in Europe.

n: 1. a European term for the depth of liquid in a storage tank. 2. formation dip. See formation dip. iMage. ullage.

n: the angle at which the bed of formation slopes away from the horizon

the angle that the structural surface or bedding plane or fault surface makes with the horizontal. Measured perpendicular to the strike and in the vertical plane.

n: a European term for the opening in the top of a container through which dipping (gauging) and sampling operations are carried out.

n: a European term for the point on the bottom of a container that the dip weight touches during gauging and from which the measurement of the oil and water depths are taken. The dip point usually corresponds with the datum point, but any difference in levels must be designated in the calibration table.

n: a European term for datum plate. dip rod n: a rigid length of wood or metal that is provided with a scale for measurement and usually graduated in units of volume. It is used for manual measurement of liquid in a container. Also called dipstick.

n: a European tem1 for gauging tape.

n: a European term for a plumb bob that is attached to a metal dip tape and that is of sufficient weight to keep the tape taut and of such shape as to facilitate the penetration of any sludge that might be present on the datum plate of a tank. Also called outage bob.

n: a European term for a point marked on the dip hatch of a tank directly above the dip point to indicate the position at which dipping should be carried out.