دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

v: to cease producing oil and gas from a well when it becomes unprofitable or to cease further work on a newly drilled well when it proves not to contain profitable quantities of oil or gas. Several steps are involved: part of the casing may be removed and salvaged;one or more cement plugs are placed in the borehole to prevent migration of fluids between the different formations penetrated by the borehole;and the well is abandoned. In most oil-producing states, it is necessary to secure permission from official agencies before a well may be abandoned.

to cease efforts to produce or inject fluids in a wells and to plug the well sufficiently to protect the environment and the ability to redrill and develop other reserves at a later date.

v: To stop drilling or production operations when it becomes unprofitable. A wildcat may be abandoned after poor results from a well test. Cement plugs are placed in the wellbore to prevent fluid migration between different zones.

n: Generally The power is supplied by electric power net. The working machine is drived by AC motor. It belongs to the drilling rig which has no self-sustaining ability.

n: a record of the measurement of porosity, done by comparing depth to the time it takes for a sonic impulse to travel through a given length of formation. The rate of travel of the sound wave through a rock depends on the composition of the formation and the fluids it contains. Because the type of formation can be ascertained by other logs, and because sonic transit time varies with relative amounts of rock and fluid, porosity can usually be determined in this way.

n: A display of traveltime of acoustic waves versus depth in a well. The term is commonly used as a synonym for a sonic log. Some acoustic logs display velocity.

a sonic travel time record of a formation using a tool with an emitter and a detector. Measures porosity and is useful to compare to other porosity longs to estimate pore filling. Also used to generate rock strength evaluations.

n: a joint to connect blowout preventers of different sizes or pressure ratings to the casing head.

n: A joint used to connect BOPs with different sizes or working pressures and casing head.

no exchange of heat with the surroundings.

n: a roller cone bit that is specially designed for air or gas drilling. It is very similar to a regular bit, but features screens over the bearings to protect them from clogging with cuttings and thicker hardfacing on the shirttail to protect them from abrasive, high-velocity air or gas drilling fluid.

n: Used compressive air which replaces flushing fluid as circulation media to cool the bit and carry over cuttings.