دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

n: The physicist A. E. Boycott found that the blood cell deposits faster when test tube deflects, especially 40°-50°, than when test tube is vertical. The same situation will be found in the drilling fluid in the horizontal well. That is why people call this

n: the prevent sticking joint that connected the top of fishing tool.

The value of the pressure on the bit multiply the rate of drilling in rotary drilling.

n: the US Department of the Interior, Minerals Management Service rules and regulations that must be followed by those who drill and produce oil and gas wells located in the Outer Continental Shelf.

seismic data capable of showing a three dimensional image of the reservoir. Strictly, 3-D is a closely spaced grid of 2-D seismic lines with interpolation to create a seismic cube. The cube can be sliced vertically to create 2-D lines or sliced horizontal

the inside annulus;tubing-by-production casing annulus. (Note, there may be regional differences in the A, B, C annulus designations and some are reversed. Inside annuli (IA) and outside annuli (OA) are more universally descriptive.)

n: The operation of a round pulling out the hole and running due to bit change or other reasons.

n: 1. a derrick or crane shaped like the letter A and used to handle heavy loads. 2. an A-shaped openwork structure that is the stationary and supporting component of the mast of a jackknife rig and to which the mast is anchored when it is in an upright or drilling position. 3. the uppermost section of a standard derrick, shaped like the letter A and used as a support in lifting objects such as the crown block to the water table.

n: A kind of "A" frame gin pole, used to elevate heavy object.

adv: 1. toward the stem of a ship or mobile offshore drilling rig. 2. behind. 3. farther aft than. See aft.

small pieces of rock broken up by the perforating process.