دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

n: see Hazard Communication Standard

n: the prevent sticking joint that connected the top of fishing tool.

. See keyseat. key valve n: see shutoff valve.

n: 1. a derrick or crane shaped like the letter A and used to handle heavy loads. 2. an A-shaped openwork structure that is the stationary and supporting component of the mast of a jackknife rig and to which the mast is anchored when it is in an upright or drilling position. 3. the uppermost section of a standard derrick, shaped like the letter A and used as a support in lifting objects such as the crown block to the water table.

n: A kind of "A" frame gin pole, used to elevate heavy object.

small pieces of rock broken up by the perforating process.

v: to cease producing oil and gas from a well when it becomes unprofitable or to cease further work on a newly drilled well when it proves not to contain profitable quantities of oil or gas. Several steps are involved: part of the casing may be removed and salvaged;one or more cement plugs are placed in the borehole to prevent migration of fluids between the different formations penetrated by the borehole;and the well is abandoned. In most oil-producing states, it is necessary to secure permission from official agencies before a well may be abandoned.

to cease efforts to produce or inject fluids in a wells and to plug the well sufficiently to protect the environment and the ability to redrill and develop other reserves at a later date.

n: a well not in use because it was a dry hole originally, or because it has ceased to produce. Statutes and regulations in many states require the plugging of abandoned wells to prevent the seepage of oil, gas, or water from one stratum of underlying rock to another.

n: Usually refers to a well which has no valuable oil or gas production or a dry hole. In general, it should be packed by cement plug.

a failure mode that can cause the cancellation-of or immediate-halt-to a project or event. Generally expressed as a percent probability.

n: pressure exceeding or falling below the pressure to be expected at a given depth. Normal pressure increases approximately 0.465 pow1ds per square inch per foot of depth or 10.5 kilopascals per metre of depth. Thus, normal pressure at 1,000 feet is 465 pounds per square inch;at 1,000 metres it is 10,500 kilopascals. See pressure gradient.

n: A formation pressure that deviates from the normal formation fluid hydrostatic pressure. Such pressure may be classified as "subnormal" (lower than normal) or "overpressured" (higher than normal).

n: It is connected above the packer of DST tool, which is used to protect the tubular subs which are installed with bourdon tube.