دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

n: The process of preparing the drilling fluid in the laboratory according to given standard.

n: the technique used to validate an automatic sampling system.

the rate that data or samples are taken per unit of time.

n: receptacle normally connected to a sampling draw-off connection or pipeline probe and used to receive the sample. When disconnected it may be used as a sample container.

n: a float moving vertically within a linearly tapered tube and exposing a variable area to the flow. Also called variable area flow meter.

n: a device attached to pipeline to permit continuous sampling of the oil, gas, or product flowing in the line.

n pi: 1. the well cuttings obtained at designated footage intervals during drilling. From an examination of these cuttings, the geologist determines the type of rock and formations being drilled and estimates oil and gas content. 2. small quantities of well fluids obtained for analysis.

n: cuttings obtained for geological information from the drilling fluid as it emerges from the hole. They are washed, dried and labelled as to the depth. Also, a portion of well fluid recovered on a DST.

n: 1. the taking of a representative sample of fluid from a tank or pipeline to measure its temperature, specific gravity, and S&W content. 2. the process of cutting a core or pieces of core for analysis.

n: A part of standard cable drilling and beam pumping unit ,which be used to bear the beam.




the uprights on a beam lift (rod) pump jack that hold the bearing housings.