دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

n: the flow of only one material-a gas or a liquid-in a pipeline.

well n: an injection well in which only one fluid is being injected.

n: in a kelly bushing, a single set of roller assemblies that are installed in the bushing at the same level, or plane. Compare double-plane roller assembly. See also kelly bushing, roller assembly.

n: an offshore system to which the production from several wells located on the seafloor is routed and to which a tanker ship ties up to load the produced oil. The tanker is moored to a single point on the buoy and is thus free to rotate around it, depending on wind and current directions.

n: a well-servicing unit whose mast consists of but one steel tube, usually about 65 feet (19.8 metres) long.

n: It can measure the angle of inclination and azimuth of a point in the borehole.

n: a directional survey that provides a single record of the drift direction and off-vertical orientation of the hole. See directional survey.

n: A technique for acquiring deviation information from a borehole on a slickline. In high-angle wells, a multishot technique is usually used instead.

n: 1. a method of well completion in which two pay zones are produced by directing fluids from one zone through a tubing string and from the other zone through the annulus. 2. the tool assembly used to complete a well by this method.

n: a blend of liquid samples taken from the upper, middle, and lower sections of a tank. For a tank of uniform cross section, such as an upright cylindrical tank, the blend consists of equal parts of the three samples. For a horizontal cylindrical tank, the blend consists of the three samples in the proportions shown in table 2, MPMS, ch. 8.1.

n: a remote transmission system for determining liquid level in tanks that require a separate receiver for each tank transmitter. Compare selective-tank remote gauge.