دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

n: the pressure exerted by a fluid upon a surface that is at rest in relation to the fluid.

n: The pressure measured in a well after the well has been closed in for a period of time, often after 24 or 72 hours. When a reservoir is first discovered, the static pressure equals the initial pressure. After production begins, the static pressure approac

the pressure when the well is not flowing. Can be surface static pressure or bottom hole static pressure.

n: the extent of variation between the lowest and highest static pressures that a particular orifice meter can record.

seal where no motion is present.

n: in gas measurement by orifice meters, the spring in a flow recorder whose size and strength determines the range over which static pressure will be recorded.

n: The time that drill pipe stop move in open hole when ground equipment break down or other reasons .

n: A kind of experimental well control way.

n: on offshore drilling rigs and production platforms, a poster that gives duties and places for each individual on the rig or platform for various types of emergeocies. Every person on the rig or platform should be familiar with the station bill.

the non-moving slips in a snubbing stack.

n: 1. a with vane-like blades d1at serves to direct a flow of fluid (such as drilling mud) onto another set of blades (called the rotor). The stator does not move;rather, it serves merely to guide the flow of fluid at a suitable angle to the rotor blades. 2. the stationary part of an induction-type alternating- current electric motor. Compare rotor.

n: A kind of axial flow vane wheel,which is non-tatating when system work ,its leaf blades distort according to a definite direction,its bladings have the function of diversion and energy transformation