دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

v: to part or open fractures in productive hard limestone formations by using a combination of oil and acid or water and acid under high pressure. See formation fracturing.

to fracture stimulate a formation by injecting the acid over the parting pressure of the rock and using the acid to etch channels in the fracture face.

n: a gas that forms an acid when mixed with water. In petroleum production and processing, the most common acid gases are hydrogen sulphide and carbon dioxide. Both cause corrosion, and hydrogen sulphide is very poisonous.

n: The mixture made by gas and water presents acidity. The gas is acid gas. The usual acid gases are hydrogen sulphide and carbon dioxide in oil and gas drilling. Both of them are acrid and hydrogen sulphide is very toxic.


any produced gas, primarily H2S and CO2 that form an acid when produced in water.

v: The natural gas which is consisted of a number of hydrogen sulphide and carbon dioxide kick

n: material of high specific gravity formed during the chemical refining treatment of oils by sulphuric acid and usually separable by settling or centrifuging. Also called acid tar.

the percent by weight loss of exposing a sample of material to an excess of acid.

a solid stick of chloro-acetic or sulfamic acid for small scale removal of acid soluble deposits.

n: a method by which petroleum-bearing limestone or other formations are put into contact with an acid to enlarge the pore spaces and passages through which the reservoir fluids flow.

n: A method used to survey the inclination according to the principle that the fluid level is horizontal and the hydrofluoric acid can erode the glass.

n: A method used to survey the inclination according to the principle that the fluid level is horizontal and the hydrofluoric acid can erode the glass.