refinaryrig

دیکشنری تخصصی مهندسی نفت - نسخه آنلاین


بزرگترین دیکشنری مهندسی نفت با بیش از 20 هزار کلمه ، مصور و با قابلیت تلفظ



نمایش نتیجه 1871 تا 1880 از 14709 نتیجه یافت شده برای P:
n: a procedure whereby the formation immediately below the casing shoe is subjected to a pressure equal to the pressure expected to be exerted later by the drilling fluid or by the drilling fluid and the back-pressure created by a kick. See leakoff test.

a LOT or an FIT test (check specifics for details),a pressurized test after primary cementing to make sure the bottom most seal with the formation will handle pressures needed for drilling the rest of the well.

n: A kind of milling and cutting tool operated by hydraulic power.

پتانسیل خودزاد جداره

n: see guide shoe. casing slip n: see spider.

n: A short section of steel filled with concrete and rounded at the bottom. This is installed on the bottom of the casing string to guide the casing past any ledges or irregularities in the borehole. Sometimes called a guide shoe.

a tapered guid shoe on the bottom of a casing string to assist in passing ledges and dog-legs in the wellbore.
پاشنه ی جداره

a pressure test of the casing seal, after the cement job, to the pressures necessary to safely control the pressure of the deeper zones.

جداره گیر

n: a fishing tool designed to grab casing from the inside so that when the spear is retrieved, the attached casing comes with it.

n: A kind of tool for fishing casing.
قلاویز جداره گیری

n: see spider.

n: A tool for seizing casing string when running casing.
بست فانه یی

جداره شکاف

n: the entire length of all the joints of casing run in a well. Most casing joints are manufactured to specifications established by API, although non-API specification casing is available for special situations. Casing manufactured to API specifications is available in three length ranges. A joint of range 1 casing is 16 to 25 feet (4.8 to 7.6 metres) long;a joint of range 2 casing is 25 to 34 feet (7.6 to 10.3 metres) long;and a joint of range 3 casing is 34 to 48 feet (10.3 to 14.6 metres) long. The out- side diameter of a joint of API casing ranges from 4Yz to 20 inches (11.43 to 50.8 centimetres).

n: The entire length of all the casing joints run into the borehole. Several different sizes of casing string may be required.

a continuous string of casing, usually cemented over at least part of its length and usually extending back to surface from the set point.
رشته ی جدار



© ۱۳۹۲-۱۳۹۷ این اثر شامل قانون حمایت از مولفین بوده و هرگونه کپی برداری از آن ممنوع است.