refinaryrig

دیکشنری تخصصی مهندسی نفت - نسخه آنلاین


بزرگترین دیکشنری مهندسی نفت با بیش از 20 هزار کلمه ، مصور و با قابلیت تلفظ



نمایش نتیجه 1891 تا 1900 از 14709 نتیجه یافت شده برای P:
n: The phenomenon that casing wall thins out or damages since friction of drill string and casing in the drilling program.

reduction in thickness x 100 / original thickness. Most common wear is from rotating strings during drilling.

the nominal weight per foot of the casing. Heavier weight casings of the same size are necessarily smaller I.D.

Pressure in the annulus between the tubing O.D. and the casing I.D.

n: The adapted procedure of the size of casing and the size of bit in well design.

نفتا

v: to cement casing in a well in a way that allows for easy retrieval of sections of casing. See casing pack.

n: a special tool with a rubber packer or lead seal that is used to repair casing. When casing is damaged downhole, a cut is made below the damaged casing, the damaged casing and the casing above it are pulled from the well, and the damaged casing is removed from the casing string. The tool is made up and lowered into the well on the casing until it engages the top of the casing that remains in the well, and a rubber packer or lead seal in the tool forms a seal with the casing that is in the well. The casing-patch tool is an overshot1ike device and is sometimes called a casing overshot.

n: A kind of tool for casing with rubber packer or sealing. Used for repairing casing.

n: in a wellbore, the space between the inside of the casing and the outside of the tubing.

n: a heavy, flanged steel fitting connected to the first string of casing. It provides a housing for slips and packing assemblies, allows suspension of intermediate and production strings of casing, and supplies the means for the annulus to be sealed off. Also called a spool.


n: gas produced with oil.



© ۱۳۹۲-۱۳۹۷ این اثر شامل قانون حمایت از مولفین بوده و هرگونه کپی برداری از آن ممنوع است.