دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

n: see Hazard Communication Standard

n: 1. a derrick or crane shaped like the letter A and used to handle heavy loads. 2. an A-shaped openwork structure that is the stationary and supporting component of the mast of a jackknife rig and to which the mast is anchored when it is in an upright or drilling position. 3. the uppermost section of a standard derrick, shaped like the letter A and used as a support in lifting objects such as the crown block to the water table.

n: A kind of "A" frame gin pole, used to elevate heavy object.

adv: 1. toward the stem of a ship or mobile offshore drilling rig. 2. behind. 3. farther aft than. See aft.

adv: on or in a ship, offshore drilling rig, helicopter, or production platform.

n: It is connected above the packer of DST tool, which is used to protect the tubular subs which are installed with bourdon tube.

n: the horizontal coordinate of a point in a plane obtained by measuring parallel to the x-axis. Compare ordinate.

n: the force in dynes that a stationary flat plate with a surface area of 1 square centimetre exerts on a similar parallel plate 1 centimetre away and moving in its own plane with a velocity of 1 centimetre per second, the space between the plates being filled with the liquid in question. It is a measure of the resistance that the liquid offers to shear. absolute error n: the difference between the result of a measurement and the true value of the measured quantity as determined by means of a suitable standard device.

n: the property by which a fluid in motion offers resistance to shear and flow. Usually expressed as newton seconds/metre.

the measure of a fluid’s ability to resist flow without regards to its density. It is defined as a fluid’s kinematic viscosity multiplied by its density.

v: I. to take in and make part of an existing whole. 2. to recover liquid hydrocarbons from natural or refinery gas in a gas- absorption plant. The wet gas enters the absorber at the bottom and rises to die top, encountering a stream of absorption oil (a light oil) travelling downward over bubblecap trays, valve trays, or sieve trays. The light oil removes, or absorbs, the heavier liquid hydrocarbons from the wet gas. See bubble-cap tray, sieve tray, valve tray.

to fill part or all of the pore spaces.

n: The treating chemical
loss during manufacturing or purifying drilling fluid agent according to the principle of absorption.