دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

n: 1. a derrick or crane shaped like the letter A and used to handle heavy loads. 2. an A-shaped openwork structure that is the stationary and supporting component of the mast of a jackknife rig and to which the mast is anchored when it is in an upright or drilling position. 3. the uppermost section of a standard derrick, shaped like the letter A and used as a support in lifting objects such as the crown block to the water table.

n: A kind of "A" frame gin pole, used to elevate heavy object.

v: to cease producing oil and gas from a well when it becomes unprofitable or to cease further work on a newly drilled well when it proves not to contain profitable quantities of oil or gas. Several steps are involved: part of the casing may be removed and salvaged;one or more cement plugs are placed in the borehole to prevent migration of fluids between the different formations penetrated by the borehole;and the well is abandoned. In most oil-producing states, it is necessary to secure permission from official agencies before a well may be abandoned.

to cease efforts to produce or inject fluids in a wells and to plug the well sufficiently to protect the environment and the ability to redrill and develop other reserves at a later date.

n: pressure exceeding or falling below the pressure to be expected at a given depth. Normal pressure increases approximately 0.465 pow1ds per square inch per foot of depth or 10.5 kilopascals per metre of depth. Thus, normal pressure at 1,000 feet is 465 pounds per square inch;at 1,000 metres it is 10,500 kilopascals. See pressure gradient.

n: A formation pressure that deviates from the normal formation fluid hydrostatic pressure. Such pressure may be classified as "subnormal" (lower than normal) or "overpressured" (higher than normal).

a pore pressure higher than a column of sea water for that true vertical depth.

n: the density of a solid or liquid substance at a specified temperature. Sometimes referred to as true density or density in vacuo. See density.

n: the force in dynes that a stationary flat plate with a surface area of 1 square centimetre exerts on a similar parallel plate 1 centimetre away and moving in its own plane with a velocity of 1 centimetre per second, the space between the plates being filled with the liquid in question. It is a measure of the resistance that the liquid offers to shear. absolute error n: the difference between the result of a measurement and the true value of the measured quantity as determined by means of a suitable standard device.

n: the theory that minerals such as oil and gas are fully owned in place before they are extracted and reduced to possession. Despite this theory, title to oil and gas may be lost by legitimate drainage and by the rule of capture. Also called ownership in place. See rule of capture.

n: total pressure measured from an absolute vacuum. It equals the sum of the gauge pressure and the atmospheric pressure. Expressed in pounds per square inch.

the reading of gauge pressure plus the atmospheric pressure.

n: 1. A vertical, cylindrical vessel that recovers heavier hydorcarbons from a mixture of predominantly lighter hydrocarbons. Also called absorption tower. 2. A vessel in which gas is dehydrated by being bubbled through glycol. See absorb.

n: It refers to the row tube holding thezinky
material during the analysis of drilling fluid. Used to survey the content
of H2S.

a vertical, cylindrical vessel that recovers heavier (longer carbon chain) hydrocarbons from a mixture of lighter hydrocarbons.