دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

v: I. to take in and make part of an existing whole. 2. to recover liquid hydrocarbons from natural or refinery gas in a gas- absorption plant. The wet gas enters the absorber at the bottom and rises to die top, encountering a stream of absorption oil (a light oil) travelling downward over bubblecap trays, valve trays, or sieve trays. The light oil removes, or absorbs, the heavier liquid hydrocarbons from the wet gas. See bubble-cap tray, sieve tray, valve tray.

to fill part or all of the pore spaces.

n: 1. A vertical, cylindrical vessel that recovers heavier hydorcarbons from a mixture of predominantly lighter hydrocarbons. Also called absorption tower. 2. A vessel in which gas is dehydrated by being bubbled through glycol. See absorb.

n: It refers to the row tube holding thezinky
material during the analysis of drilling fluid. Used to survey the content
of H2S.

a vertical, cylindrical vessel that recovers heavier (longer carbon chain) hydrocarbons from a mixture of lighter hydrocarbons.

n: the maximum volume of natural gas that can be processed through an absorber at a specified absorption oil rate, temperature, and pressure without exceeding pressure drop or any oilier operating limitation.

n: liquid particles that may be carried out of the top of a distillation or absorber column with the vapors or residue gas.

n: a hydrocarbon liquid, usually lighter in weight than kerosene and heavier than paint thinner. In a gas processing plant. lean oil is used in an absorber to remove heavier hydrocarbons from natural gas.

n: The internal-aerating sealing container at the exit of the pump,which can decrease the unequal of delivery capacity and fluctuation of pressure.

n: The internal-aerating sealing container at the import of the suction valve,which can make the velocity of fluid stability.

n: a tray, installed in an absorber tower or fractionating column, that is similar to a bubble-cap tray, except that it has only holes but no bubble caps through it. This type of tray is more efficient than the bubblecap tray or the valve tray and less expensive than either;however, it does not operate properly over a wide range of flow rates.

n: 1. a device that mechanically or hydraulically forces pipe or tools into the well against pressure. 2. a device within some hooks that acts as a shock absorber in eliminating the bouncing action of pipe as it is picked up.

n: A suit of equipment be controled by hydraulic pressure,which can tripping in at definite pressure.

n: a tray installed in an absorber tower or fractionating column, similar to a bubble-cap tray except that the passageways permitting gas flow upward through the tray possess valves that reduce the size of the passages when the flow rate is reduced. Valve trays are more common than bubble-cap trays, because they are more efficient and less expensive.