دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

seismic data capable of showing a three dimensional image of the reservoir. Strictly, 3-D is a closely spaced grid of 2-D seismic lines with interpolation to create a seismic cube. The cube can be sliced vertically to create 2-D lines or sliced horizontal

annualized average incremental oil rate.

n: a well not in use because it was a dry hole originally, or because it has ceased to produce. Statutes and regulations in many states require the plugging of abandoned wells to prevent the seepage of oil, gas, or water from one stratum of underlying rock to another.

n: Usually refers to a well which has no valuable oil or gas production or a dry hole. In general, it should be packed by cement plug.

n: the average reservoir pressure at which an amount of gas insufficient to permit continued economic operation of a producing gas well is expelled. abd, abdn abbr: abandoned;used in drilling reports.

The minimum pressure of the reservoir when the wells are abandoned.

estimation/measurement of age of a formation, fossil, etc., in years before the present.

n: the theory that minerals such as oil and gas are fully owned in place before they are extracted and reduced to possession. Despite this theory, title to oil and gas may be lost by legitimate drainage and by the rule of capture. Also called ownership in place. See rule of capture.

n: the percentage of the total bulk volume of a rock sample that is composed of pore spaces or voids. See porosity.

the percentage of the total bulk volume that is pore spaces, voids or fractures.

n: a procedure whereby a product may be subjected to intensified but controlled conditions of heat, pressure, radiation, or other variables to produce, in a short time, the effects of long- time storage or use under normal conditions.

n: 1. a vessel or tank that receives and temporarily stores a liquid used in a continuous process in a gas plant. See drip accumulator. 2. on a drilling rig, the storage device for nitrogen-pressurised hydraulic fluid, which is used in operating the blow out preventers. See blowout preventer control unit.

n: Used to store nitrogen that provide the hydraulic oil energy for BOP operation.

n: a method of joining steel components in which acetylene gas and oxygen are mixed in a torch to attain the high temperatures necessary for welding. As an early type of welding (it was also called oxyacetylene welding),its primary disadvantage was the seepage of molten weld material onto the interior surface of the pipe, often leading to corrosion problems.