دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

abbr: aluminum cable steel- reinforced conductor.

n: a transformer with only one winding, part of which is used for either the primary or secondary conductor, and part of which is used as both primary and secondary conductors.

n: 1. a tubular device placed in a vertical position, either inside or outside a larger vessel, and through which well fluids are conducted before they enter the larger vessel. A boot aids in the separation of gas from wet oil. Also called a flume or conductor pipe. 2. a large pipe connected to a process tank to provide a static head that can absorb surges of fluid from the process tank. Also called surge column.

a strong, braided wireline of various sizes used in retrieving tools heavier than slickline can handle. Electrical line is a braided line with a center conductor.

n: an assembly of electrical conductors for collecting current from several sources and distributing it to feeder lines so that it will be available where needed. Also called bus bar.

n: (C) the ratio of an impressed electrical charge on a conductor to the change in electrical potential;measured in farads. See capacitor.

n: Installation of conductor line at well head.

n: A well installed with conductor line.

n: wire line made of braided aluminum wires, which is strengthened by the addition of steel wires, and which conducts electricity.