دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

n: A method used to survey the inclination according to the principle that the fluid level is horizontal and the hydrofluoric acid can erode the glass.

n: A method used to survey the inclination according to the principle that the fluid level is horizontal and the hydrofluoric acid can erode the glass.

n: The intaking method that the fluid level of intaking can is higher than center line of pump cylinder in order to improve intaking ability of pump.

n: a method of killing a well in which the mud level in the pits is held constant while the choke size is reduced and the pump speed slowed. It is not effective, and therefore is not recommended, because casing pressure increases to the point at which the formation fractures or the casing ruptures, and control of the well is lost.

n: A kind of well killing method. Keep fluid level of drilling fluid constant by decreasing the diameter of choke and slowing down speed of pump.

n: a kind container receiving the returning fluid from the well and making the fluid flow into the deck through the orifice in a wider fluid level and a lower flowing speed

n: the equipment used to supervise and control the ability,volume,flow capacity and the fluid level of the suction jar

n: the point to which the static fluid level drops in the casing or tubing of a well under producing conditions.

n: the smaller of the side fittings on a bell nipple, used to fill the hole when drill pipe is being removed from the well.

n: The line through which fluid is added to the annulus to maintain the fluid level in the well bore during the extraction of the drilling assembly.

n: Pumping drilling fluid continuously or intermittently into the wellbore to maintain the fluid level in the hole near the surface. The purpose is to avoid danger of blowout, water intrusion and/or caving of the wellbore.

n: The line through which fluid is added to the annulus to maintain the fluid level in the well bore during the extraction of the drilling assembly.