دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

n: (DST) the conventional method of formation testing. The basic drill stem test tool consists of a packer or packers, valves or ports that may be opened and closed from the surface, and two or more pressure-recording devices. The tool is lowered on the drill string to the zone to be tested. The packer or packers are set to isolate the zone from the drilling fluid column. The valves or ports are then opened to allow for formation flow while the recorders chart static pressures. A sampling chamber traps clean formation fluids at the end of the test. Analysis of the pressure charts is an important part of formation testing.

n: during drilling or affter well completation ,lower the drillstem tester into the layer to make the pressure build up test so as to eatimate the layers and the fluid parameters

n: in formation testing, an interval during which a well is allowed to flow while flow characteristics are being measured.

n: the gathering of pressure data and fluid samples from a formation to determine its production potential before choosing a completion method. Formation testing tools include formation testers and drill stem test tools.

n: the measurement and gathering of the data on a formation to determine its potential productivity.

wireline formation tester or wireline formation testing.

n: a formation fluid sampling device, actually run on conductor line rather than wireline, that also logs flow and shut-in pressure in rock near the borehole. A spring mechanism holds a pad finnly against the sidewall while a piston creates a vacuum in a test chamber. Formation fluids enter the test chamber through a valve in the pad. A recorder logs the rate at which the test chamber is filled. Fluids may also be drawn to fill a sampling chamber. Wireline formation tests may be done any number of times during one trip in the hole, so they are very useful in formation testing.

a formation fluid sampling device.