دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

n: the force in dynes that a stationary flat plate with a surface area of 1 square centimetre exerts on a similar parallel plate 1 centimetre away and moving in its own plane with a velocity of 1 centimetre per second, the space between the plates being filled with the liquid in question. It is a measure of the resistance that the liquid offers to shear. absolute error n: the difference between the result of a measurement and the true value of the measured quantity as determined by means of a suitable standard device.

n: Actual mean value of rate of throughput through the pump.

n: 1.the injection of air into a reservoir in a pressure maintenance or an in situ combustion project. 2. the injection of fuel into the combustion chamber of a diesel engine by means of a jet of compressed air.

n: a beam pumping unit on which the counterbalancing is done by means of an air cylinder.

n: a process for manufacturing components for 100-octane gasoline. An alkyl group is introduced into an organic compound either with or without a catalyst. Now usually used to mean alkylation of isobutane with propene, butenes, or hexenes in d1e presence of concentrated sulphuric acid or anhydrous hydrofluoric acid.

a reverse cracking process that convents hydrocarbon light ends (olefins) into longer chain, liquid fuels.

n: a device that secures, or fastens, equipment. In producing wells with sucker rod pumps, a gas anchor is a special section of perforated pipe installed below the pump. It provides a space for gas to break out of the oil. In offshore drilling, floating drilling vessels are often secured over drill sites by large anchors like those used on ships. For pipelines, a device that secures pipe in a ditch.

n: Means of holding the deadline to the derrick or substructure. Usually this is the primary element of the weight indicator

a device with slips that holds equipment in the wellbore.

n: any method used to raise oil to the surface through a well after reservoir pressure has declined to the point at which the well no longer produces by means of natural energy. Sucker rod pumps, gas lift, hydraulic pumps, and submersible electric pumps are the most common means of artificial lift.

one of several methods that provide pressure assistance to increase flow from a well. The most common systems lighten (decrease density) of the flowing fluid (gas lift),or remove all or part of the liquid head from the reservoir (beam and electric submer

n: (avg) approximately or resembling an arithmetic mean, specifically, about midway between extremes.

inflatable devices in a pipeline meant to stop flow.

n: A method of cementing. Put a stop means below the section of cementing, fill the tailored slurry in the bailer, land to the desired location, open the bailer and make slurry in the well. Repeat the process till all slurry poured into the well.