دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

n: 1. A vertical, cylindrical vessel that recovers heavier hydorcarbons from a mixture of predominantly lighter hydrocarbons. Also called absorption tower. 2. A vessel in which gas is dehydrated by being bubbled through glycol. See absorb.

n: It refers to the row tube holding thezinky
material during the analysis of drilling fluid. Used to survey the content
of H2S.

a vertical, cylindrical vessel that recovers heavier (longer carbon chain) hydrocarbons from a mixture of lighter hydrocarbons.

n: a gas that forms an acid when mixed with water. In petroleum production and processing, the most common acid gases are hydrogen sulphide and carbon dioxide. Both cause corrosion, and hydrogen sulphide is very poisonous.

n: The mixture made by gas and water presents acidity. The gas is acid gas. The usual acid gases are hydrogen sulphide and carbon dioxide in oil and gas drilling. Both of them are acrid and hydrogen sulphide is very toxic.


any produced gas, primarily H2S and CO2 that form an acid when produced in water.

n: an acid treatment in which an acid mixture is circulated through a wellbore to clean it.

an essentially inert mixture of particles of a particular size range.

n: diving in which a diver uses a normal atmospheric mixture of oxygen and nitrogen as a breathing medium. It is limited to depths less than 190 feet (58 metres) because of the dangers of nitrogen narcosis;however, dives with bottom times of 30 minutes or less may be conducted to a maximum of 220 feet (67 metres).

n: a chemical family of specific organic compounds, including monoethanolamine (MEA),diethanolamine (OEA),and triethanolamine (TEA). These chemicals, and proprietary mixtures containing them and other amines, are used extensively for the removal of hydrogen sulphide and carbon dioxide from other gases and are particularly adapted for obtaining the low acid gas residuals that are usually specified by pipelines.

n: states that the volume occupied by a mixture of gases equals the sum of the volumes each gas would occupy at the pressure and temperature of the mixture.

n: the lowest temperature at which the chemical aniline and a solvent (such as the oil in oil-base muds) will mix completely. In general, the oil of oil-base muds should have an aniline point of at least 150F (66"C) to obtain maximum service life from the rubber components in the mud system.

n: The lowest temperature in which the same volume of oil and aniline dissolve in each other.

the aromatics content of a mixture.

n: one of a group of solid. liquid, or semisolid materials that are predominantly mixtures of heavy hydrocarbons and their non-metallic derivatives and are obtained either from natural bituminous deposits or from the residues of petroleum refining.

n: a mixture of liquids that distills without a change in composition. The azeotropic mixture exhibits a constant maximum or minimum boiling point, which is either higher or lower than that of its components.