دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

n: termination of a jurisdictional sale or service. Under Section 7(b) of the Natural Gas Act, the Federal Energy Regulatory Commission must determine in advance that the present or future public convenience and necessity" or depletion of gas supplies requires termination.

n: the maximum volume of natural gas that can be processed through an absorber at a specified absorption oil rate, temperature, and pressure without exceeding pressure drop or any oilier operating limitation.

n: the gasoline extracted from natural gas by putting the gas into contact with oil in a vessel and subsequently distilling the gasoline from the heavier oil.

gasoline extracted from wet natural gas by putting the gas in contact with oil.

n: a hydrocarbon liquid used to absorb and recover components from natural gas being processed. Also called wash oil.

n: a plant that processes natural gas with absorption oil.

v: The natural gas which is consisted of a number of hydrogen sulphide and carbon dioxide kick

n: a solid used to remove components from natural gas that is being processed.

n: Usually refers to the solid substance that can adsorb gas and solute.

n: the adhesion of a thin film of a gas or liquid to the surface of a solid. Liquid hydrocarbons are recovered from natural gas by passing the gas through activated charcoal, silica gel, or other solids, which extract the heavier hydrocarbons. Steam treatment of the solid removes the adsorbed hydrocarbons, which are then collected and re-condensed. The adsorption process is also used to remove water vapour from air or natural gas. Compare absorption.

n: A surface phenomenon exhibited by a solid (adsorbent) to hold or concentrate gases, liquids or dissolved substances(adsorptive) upon its surface, due to adhesion.

the attraction and holding of a layer of a chemical on the wall of a formation. Usually held by ionic charge or wetting preference.

n: a plant that processes natural gas with an adsorbent.

n: the injection of air or gas into a liquid. In the oil industry a common form of aeration is the injection of natural gas into reservoir liquids standing in a well. Aeration with natural gas reduces the density of the liquids and allows declining reservoir pressure to lift the liquids. See gas lift.

n: The technique of injecting air or gas in varying amounts into a drilling fluid for the purpose of reducing hydrostatic head. See also Air Cutting.

intoduction of air.