دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

n: I. a term used for particles smaller than \1156 millimetre (4 microns) in size, regardless of mineral composition. 2. a group of hydrous aluminum silicate minerals (clay minerals). 3. a sediment of fine clastics.

n: (1) A soft, variously colored earth, commonly hydrous silicates of alumina, formed by the decomposition of feldspar and other aluminum silicates. Clay minerals are essentially insoluble in water but disperse under hydration, grinding, or velocity effects.

a fine grain (<0.00015” or about 4 microns) – finely crystalline silica sheet minerals. Usually of silicate composition. In oil field terms, the most common clays are Smectite (montmorillinite),illite, kaolinite and chlorite. The characteristic for autho

n: if the dry hole is found in the hired areas or oil field ,the lease will continue at certain period and the lessee will delay the payment

valence state +3 iron in solution. A very common catalyst in oil field emulsion and sludge formation. Precipitates at iron hydroxide when the pH exceeds 1.8 to 2.2 (depending on sour conditions).

valence state +2 iron in solution. In oil field operations, most solution iron is ferrous until oxygen is encountered. Precipitates at iron hydroxide when the pH exceeds 7 or when oxidized to ferric by contact with oxygen.

n: situated by the margine of oil field, it is thought to be commercial or non-commercial oil hole, it belong to semi-exploration well.

n: it uses in oil field drilling to except to rectangle screen, and expreses minimum screen of retangle mesh equelvent to the american mesh.

nitrile butadiene rubber. The most widely used elastomers in the oil field.

n: 1. An accumulation, pool or group of pools of oil in the subsurface. An oil field consists of a reservoir in a shape that will trap hydrocarbons and that is covered by an impermeable or sealing rock. Typically, industry professionals use the term with an