دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

n: the effluent of a cone-shaped centrifuge that passes up the inside of the cone and leaves through the vortex finder.

n: 1 the volume of fluid return from the mouth above the pump input , the phenomenonof fluid automatic flowing out. 2. the fluid derived from the overflow pipe of whirling current separator.

n: the tube that entries the output overflow of two or more hydraulic whirling current separator .

n: the assembly tube that one or more overflow of hydraulic whirling curreent separator or one or more overflow of mainfold is directionally distributed.

n: the outflow mouth of lower solids content in hydraulic whirling current separator and centrifuge.

n: a pipe installed at the top of a tank to enable the liquid within it to be discharged to another vessel when the tank is filled to capacity.

n: the phenomenon that the fluid overflow the surface of screen when the fluid through the shaker exceeds its treating ability.

n: an excess quantity of fluid used to push acid out of the tubing or casing when an acid mixture is put into a well, thus directing the acid to the desired place in the well.

the fluid that is pumped after the last reactive or active part of a stimulation to displace the stimulation down to (displacement) or into (overflush) the formation.

n: a hole whose diameter is larger than the diameter of the bit used to drill it. An overgauge hole can occur when a bit is not properly stabilised or does not have enough weight put on it.

n: the well its diameter exceeds the diameter of bit.