refinaryrig

دیکشنری تخصصی مهندسی نفت - نسخه آنلاین


بزرگترین دیکشنری مهندسی نفت با بیش از 20 هزار کلمه ، مصور و با قابلیت تلفظ



نمایش نتیجه 951 تا 960 از 1065 نتیجه یافت شده برای over:
n: (TEOR) a method of increasing well productivity and recoverable oil by using heat, e.g., steam injection (the huff n puff method),steam flood, or in situ combustion.

a measurement of the processing of kerogen towards dry methane gas. Usually expressed at Vitronite reflection percent. Vro <0.6 is a immature oil, 0.6 to 1.0 is a oil with dissolved gas, 1.0 to 1.3 is wet gas and >1.4 is dry gas. Vro over values of about

n: a type of improved recovery in which heat is introduced into a reservoir to lower the viscosity of heavy oils and to facilitate their flow into producing wells. The pay zone may be heated by injecting steam (steam drive) or by injecting air and burning a portion of the oil in place (in situ combustion). See cyclic steam injection, in situ combustion, steam drive.

an enhanced oil recovery process that uses heat to reduce oil viscosity.

n: a temperature-sensitive element with variable resistivity for overload protection in motors.

n: The thickness of bit cuttings that covering on the screening surface when mud desander
working orderly.

n: The thickness of bit cuttings that covering on the screening surface when mud desander
working orderly.

n: grooved metal fitting to protect the eye or the fastening loop of a wire rope. The thimble conforms to the inside shape of the ropes eye and covers the wire ropes strands.

n: the property exhibited by a fluid that is in a liquid state when flowing and in a semisolid, gelled state when at rest. Most drilling fluids must be thixotropic so that cuttings will remain in suspension when circulation is stopped.

n: The characteristic of a fluid, such as a drilling mud, to form a gelled structure over time when not subject to shearing and then to liquefy when agitated. The viscosity of a thixotropic fluid changes with time under constant shear rate until reaching equ
ژله گرایی

n: The phenomenon that thread standing overload and slipping because of deformation.

a perforating gun small enough to be run and recovered through the tubing.



© ۱۳۹۲-۱۳۹۷ این اثر شامل قانون حمایت از مولفین بوده و هرگونه کپی برداری از آن ممنوع است.