دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

The value of the pressure on the bit multiply the rate of drilling in rotary drilling.

allowable annular surface pressure.

n: the average reservoir pressure at which an amount of gas insufficient to permit continued economic operation of a producing gas well is expelled. abd, abdn abbr: abandoned;used in drilling reports.

The minimum pressure of the reservoir when the wells are abandoned.

n: A formation pressure that is higher than the normal formation fluid hydrostatic pressure.

n: pressure exceeding or falling below the pressure to be expected at a given depth. Normal pressure increases approximately 0.465 pow1ds per square inch per foot of depth or 10.5 kilopascals per metre of depth. Thus, normal pressure at 1,000 feet is 465 pounds per square inch;at 1,000 metres it is 10,500 kilopascals. See pressure gradient.

n: A formation pressure that deviates from the normal formation fluid hydrostatic pressure. Such pressure may be classified as "subnormal" (lower than normal) or "overpressured" (higher than normal).

n: The abnormal pressure per meter in depth, usually express as MPa/m. It is the reference
of density of the mud and the procedure of the casing design.

a pore pressure higher than a column of sea water for that true vertical depth.

n: the maximum flow rate that a well could theoretically deliver with zero pressure at the face of the reservoir.

the maximum rate that a well can produce at the lowest possible bottom hole pressure.

the theoretical maximum flow that a well could deliver with a zero backpressure at the middle of the perforations.