refinaryrig

دیکشنری تخصصی مهندسی نفت - نسخه آنلاین


بزرگترین دیکشنری مهندسی نفت با بیش از 20 هزار کلمه ، مصور و با قابلیت تلفظ



نمایش نتیجه 1 تا 10 از 42 نتیجه یافت شده برای spin:
n: The spin table is controlled to be convenient for removing drill bit and holding reactive torque when using mud motor.

n: a pump with an impeller An electric submersible pump is a centrifugal pump.

n: A machine for moving fluid by spinning it using a rotating impeller in a pump casing with a central inlet and a tangential outlet. The path of the fluid is an increasing spiral from the inlet at the center to the outlet, tangent to the annulus. In the ann

pump with an impeller or rotor that spins in a housing and the drag forces on the fluids cause them to flow.
تملبه ی گریز از مرکز

n: a machine that uses centrifugal force to separate substances of varying densities. A centrifuge is capable of spinning substances at high speeds to obtain high centrifugal forces. Also called the shake-out or grind-out machine.

n: An item of solids-removal equipment that removes fine and ultrafine solids. It consists of a conical drum that rotates at 2000 to 4000 rpm. Drilling fluid is fed into one end and the separated solids are moved up the bowl by a rotating scroll to exit at t

a device that separates materials by density through a centrifugal motion.
گریز از مرکز

n: a produciton log used to determine which of several zones contributes the most to the total production or, in the case of an injection well, which zone is receiving the most injected fluids.

devices that typically use centrifugal flow paths to spin solids out of a drilling or circulating fluid.

n: a tool cased on the pipe or collar and used to load and unload the join thread

n: on a mechanical engine governor, one of usually two small metal weights that spin as the engine runs. When the engine speeds up, centrifugal force on the spinning flyweights increases, which causes a spring to compress and slow the engine down. Conversely, when the engine slows down, centrifugal force on the flyweights decreases which causes the spring to expand and speed the engine up.

n: a device an engine operator uses to separate water and solid materials from fuel. Centrifugal force created by the rapidly spinning centrifuge causes dirt and water. which are heavier (denser) than fuel, to move to the outside of the centrifuge where they are removed.

n: on a spinning chain, a piece of fiber rope (soft line) that is attached to the end of the chain that is wrapped around the tool joint. When the makeup cathead pulls the chain off the drill pipe, a rotary helper uses the guideline to control the chains movement.
کابل راهنما (در اتاقک غواصی)

n: a wheel or disk mounted to spin rapidly about one axis but free to rotate about one or both of two axes perpendicular to each other. The inertia of the spinning wheel tends to keep its axis pointed in one direction regardless of how the other axes are rotated.

n: a wheel or disc mounted to spin rapidly about one axis,but free to rotate about one or both of other two axes.the inertia of the wheel keeps the axis aligned with the reference direction (true north).


۱
۲
-

© ۱۳۹۲-۱۳۹۷ این اثر شامل قانون حمایت از مولفین بوده و هرگونه کپی برداری از آن ممنوع است.