نمایش نتیجه 1 تا 10 از 12 نتیجه یافت شده برای standard temperature:
0.763 lb/ft3 at standard temperature and pressure.
abbr: the correction for temperature of liquid;a factor used during proving to convert the temperature of a liquid to a standard temperature.
coiled tubing logging.
abbr: the correction for temperature of steel;a factor used during proving to adjust the temperature of the prover steel to a standard temperature.
the total energy transferred as heat in an ideal combustion reaction at standard temperature and pressure in which all water formed appears as a liquid.
n: (GSV) the total volume of all petroleum liquids and sediment and water, excluding free water, corrected by the appropriate temperature correction factor (Ctl)for the observed temperature and API gravity, relative density, or density to a standard temperature such as 60�F or 15�C, and also corrected by the applicable pressure correction factor (Cpl) and meter factor.
n: (NSV) the total volume of all petroleum liquids, excluding S&W and free water, corrected by the appropriate temperature correction factor (Ctl) for the observed temperature and API gravity, relative density, or density to a standard temperature such as 60�F or IS.C, and also corrected by the applicable pressure correction factor (Cpl) and meter factor.
n: a measure of heating value for natural gas that is fully saturated with water vapor under standard temperature, pressure, and gravity conditions. This is typically a laboratory condition to standardize the amount of water vapor in the gas at a convenient, albeit arbitrary, level. This standard of measure usually has little or nothing to do with the state in which the gas is actually delivered for first sales.
n: a pre-determined temperature used as a basic measurement. The petroleum industry uses 60�F (15.5�C) as its standard temperature during measurement of oil. The volume of a quantity of oil at its actual temperature (assuming it is not 60�F) is converted to the volume the oil would occupy at 60�F. Conversion can be aided by the use of API conversion tables. standing
n: A unified regulated temperature value for measuring physical property,because many substances have different physical property at different temperature.
standard temperature and pressure.
n: a device on a meter that automatically converts the flowing temperature of the fluid through the meter to a standard temperature.
