دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

n: 1. a derrick or crane shaped like the letter A and used to handle heavy loads. 2. an A-shaped openwork structure that is the stationary and supporting component of the mast of a jackknife rig and to which the mast is anchored when it is in an upright or drilling position. 3. the uppermost section of a standard derrick, shaped like the letter A and used as a support in lifting objects such as the crown block to the water table.

n: A kind of "A" frame gin pole, used to elevate heavy object.

n: According to the characteristic that different substances absorb different light spectrum, it can be used to investigate and survey the molecule structure, kinds and attribution of the organic compounds.

n: a device that secures, or fastens, equipment. In producing wells with sucker rod pumps, a gas anchor is a special section of perforated pipe installed below the pump. It provides a space for gas to break out of the oil. In offshore drilling, floating drilling vessels are often secured over drill sites by large anchors like those used on ships. For pipelines, a device that secures pipe in a ditch.

n: Means of holding the deadline to the derrick or substructure. Usually this is the primary element of the weight indicator

a device with slips that holds equipment in the wellbore.

n: 1. one of two electrodes in an electrolytic cell;represented as the negative terminal of the cell, it is the area from which electrons flow. In a primary cell, it is the electrode that is wasted or eaten away. 2. in cathodic protection systems, an electrode to which a positive potential of electricity is applied, or a sacrificial anode, which protects a structure by forming one electrode of an electric cell.

the positively charged site in a cell. Oxidation site. The site of metal loss in corrosion.

a formed metal bar (zinc, aluminum, etc.) attached by electrical wire to a structure to be protected and buried in conductive soil near that structure.

a large, load supporting formation that may serve to reduce the total overburden load on a pay zone. These formations may cover hundreds of square miles over a basin. A second use is as a semi-stable structure of sand grains around a perforation or other