دیکشنری تخصصی مهندسی نفت - نسخه آنلاین

n: The cement made by bauxite and limestone. This cement is heatproof, non-corrodible and firm in the early stage. Applied in geothermal well and thermal recovery well.

n: (EOR) 1. the introduction of artificial drive and displacement mechanisms into a reservoir to produce a portion of the oil unrecoverable by primary recovery methods. To restore formation pressure and fluid flow to a substantial portion of a reservoir, fluid or heat is introduced through injection wells located in rock that has fluid communication with production wells. See alkaline (caustic) flooding, gas injection, micellar-polymer flooding, primary recovery, secondary recovery, tertiary recovery, thermal recovery, waterflooding. 2. the use of certain recovery methods that not only restore formation pressure but also improve oil displacement or fluid flow in the reservoir. These methods may include chemical flooding, gas injection, and thermal recovery.

one or more of a variety of processes that seek to improve recovery of hydrocarbon from a reservoir after the primary production phase.

n: a method of thermal recovery in which water at the boiling point is injected into a formation to lower the viscosity of the oil and allow it to flow more freely toward producing wells. Although generally less effective than steam injection because of lower heat, hot waterflooding may be preferable under certain conditions, such as formation sensitivity to fresh water or high pressures.

n: a method of improved recovery in which steam is injected into a reservoir through injection wells and driven toward production wells. The steam reduces the viscosity of crude oil, causing it to flow more freely. The heat vaporises lighter hydrocarbons;as they move ahead of the steam, they cool and condense into liquids that dissolve and displace crude oil. The steam provides additional gas drive. This method is used to recover viscous oils. Also called continuous steam injection or steam flooding. Compare cyclic steam injection, thermal recovery.

n: a type of improved recovery in which heat is introduced into a reservoir to lower the viscosity of heavy oils and to facilitate their flow into producing wells. The pay zone may be heated by injecting steam (steam drive) or by injecting air and burning a portion of the oil in place (in situ combustion). See cyclic steam injection, in situ combustion, steam drive.

an enhanced oil recovery process that uses heat to reduce oil viscosity.