refinaryrig

دیکشنری تخصصی مهندسی نفت - نسخه آنلاین


بزرگترین دیکشنری مهندسی نفت با بیش از 20 هزار کلمه ، مصور و با قابلیت تلفظ



نمایش نتیجه 1 تا 10 از 244 نتیجه یافت شده برای vertical:
n: The physicist A. E. Boycott found that the blood cell deposits faster when test tube deflects, especially 40°-50°, than when test tube is vertical. The same situation will be found in the drilling fluid in the horizontal well. That is why people call this

seismic data capable of showing a three dimensional image of the reservoir. Strictly, 3-D is a closely spaced grid of 2-D seismic lines with interpolation to create a seismic cube. The cube can be sliced vertically to create 2-D lines or sliced horizontal

a pore pressure higher than a column of sea water for that true vertical depth.

n: 1. A vertical, cylindrical vessel that recovers heavier hydorcarbons from a mixture of predominantly lighter hydrocarbons. Also called absorption tower. 2. A vessel in which gas is dehydrated by being bubbled through glycol. See absorb.

n: It refers to the row tube holding thezinky
material during the analysis of drilling fluid. Used to survey the content
of H2S.

a vertical, cylindrical vessel that recovers heavier (longer carbon chain) hydrocarbons from a mixture of lighter hydrocarbons.
ظرف جذب


n: see drift angle.

n: The angle between the tangent of borehole axis and vertical line, measured by inclinometer.
زاویه ی انحراف

the deviation angle (from vertical) at which a solid material will no longer fall down the pipe, but will begin to accumulate on the pipe wall. The angle of repose for dry, round sand is about 62o and for wet sand about 50o to 60o depending on size, shape

n: a glass-stem thermometer in which the tail is bent at an angle to the stem so that the tail can be mounted in a horizontally disposed thermowell, leaving the scale vertical for greater ease of reading.

n: one type of misalignment in a chain-and-sprocket drive. The shafts are not parallel to each other (they form an angle) in either the horizontal or the vertical plane. This pulls the link plates on one side tighter than those on the other side;thus, one side of the chain and sprockets wears faster than the other. Link plates on only one side of the chain break because of fatigue.

n: The vertical heigh from the top of girder of drill floor to the bottom surface of crownblock beam.

n: The vertical heigh from the drill floor to the floor of monkey board.


۱
۲
-

© ۱۳۹۲-۱۳۹۷ این اثر شامل قانون حمایت از مولفین بوده و هرگونه کپی برداری از آن ممنوع است.