refinaryrig

دیکشنری تخصصی مهندسی نفت - نسخه آنلاین


بزرگترین دیکشنری مهندسی نفت با بیش از 20 هزار کلمه ، مصور و با قابلیت تلفظ



نمایش نتیجه 1791 تا 1800 از 14709 نتیجه یافت شده برای P:
n: an economic analysis that relates investments to subsequent revenues and also makes possible a comparison between investments. It usually also includes the general plan to be used for the figuring of federal income tax on the investments.

n: 1. steel pipe placed in an oil or gas well to prevent the wall of the hole from caving in, to prevent movement of fluids from one formation to another, and to improve the efficiency of extracting petroleum if the well is productive. A joint of casing may be 16 to 48 feet (4.8 to 14.6 metres) long and from 4.5 to 20 inches (11.4 to 50.8 centimetres) in diameter. Casing is made of many types of steel alloy, which vary in strength, corrosion resistance, and so on. 2. large pipe in which a carrier pipeline passes under railroad rights-of-way and some roads to shield the pipeline from the unusually high load stresses of a particular location. State and local regulations identify specific locations where casing is mandatory.

n: Steel pipe placed in an oil or gas well to prevent the wall of the hole in a drilled interval from caving in, as well as to prevent movement of fluids from one formation to another.


one of several strings of steel pipe in a well design that, together with cement, forms a barrier to fluid movement along the drilled hole. It is commonly at least partly cemented in the wellbore.
جداره رانی


n: a swage nipple, usually beveled, installed on the top of a string of pipe that does not extend to the surface. It prevents a smaller string of pipe or tools from hanging up on the top of the column when it is run into the well.

n: The joint that is installed at the top of the casing string which doesnt reach to the earth surface.
تبدیل جداره

توپک مهار جداره

n: The tool used for casing.

n: the amount of pressure that, when applied inside a string of casing, causes the wall of the casing to fail. This pressure is critically important when a gas kick is being circulated out, because gas on the way to the surface expands and exerts more pressure than it exerted at the bottom of the well.

n: The pressure leading to collapsing of the casing.

n: This kind of thread presents trapezium. Clamping and transmiting axial force depend on the heel and top of thread.

n: The borehole log formed by the cal measuring CID.

n: a device secured around the casing at regular intervals to centre it in the hole. Casing that is centralised allows a more uniform cement sheath to form around the pipe.

n: The additional tool for cementing. There are many kinds of casing centralizer. Usually using relief centralizer

one of several centralizer designs intended to keep the casing better centered in the borehole to get better cement jobs.
وسط نگه دار جداره



© ۱۳۹۲-۱۳۹۷ این اثر شامل قانون حمایت از مولفین بوده و هرگونه کپی برداری از آن ممنوع است.