refinaryrig

دیکشنری تخصصی مهندسی نفت - نسخه آنلاین


بزرگترین دیکشنری مهندسی نفت با بیش از 20 هزار کلمه ، مصور و با قابلیت تلفظ



نمایش نتیجه 2111 تا 2120 از 14709 نتیجه یافت شده برای P:
a flow area in the cement from inefficient cementing displacement of the drilling mud.

an interconnected pathway through the matrix of the rock or an open fracture or other feature that connects a reservoir and the wellbore.

n: when casing is being cemented in a borehole, the cement slurry can fail to rise uniformly between the casing and the borehole wall, leaving spaces, or channels, devoid of cement. Ideally, the cement should completely and uniformly surround the casing and form a strong bond to the borehole wall. See cement channeling.

n: See cement channeling.
رگه شدن

n: The alternation characteristic of cut point when the cyclone works under different operating pressure.

n: The interrelationship among torque of turbine, horsepower, drop of pressure, efficiency and rotate speed. Reflects the working condition of turbine.

n: a test standardised by the American Gas Association and the Gas Processor Association for determining the natural gasoline content of a given natural gas. The gasoline is adsorbed from the gas on activated charcoal and then recovered by distillation. The test is described in Testing Code 101-43, a joint AGA and GPA publication.

n: Setting a centrifugal pump of low pressure feed flow at tail pipe in order to improve intaking ability of pump.

n: oil that is to be treated in, or charged to, a particular refinery unit.

n: The intaking method that the fluid level of intaking can is higher than center line of pump cylinder in order to improve intaking ability of pump.

n: This states that if the volume of a body of gas is kept constant, pressure is inversely proportional to temperature. Usually expressed as P1/T1=P2/T2.



© ۱۳۹۲-۱۳۹۷ این اثر شامل قانون حمایت از مولفین بوده و هرگونه کپی برداری از آن ممنوع است.