refinaryrig

دیکشنری تخصصی مهندسی نفت - نسخه آنلاین


بزرگترین دیکشنری مهندسی نفت با بیش از 20 هزار کلمه ، مصور و با قابلیت تلفظ



نمایش نتیجه 2121 تا 2130 از 14709 نتیجه یافت شده برای P:
n: part of a company that interprets and processes the charts. The departments responsibilities include calculating the gas flow from the information on the chart. Today, charts have been largely supplanted by electronic readouts generated by computer controlled sensors at the orifice meter station. These readouts are transmitted to the companys computers in a central, or district, office, where they are recorded and read.

n: an agreement by which a ship owner agrees to place an entire ship, or part of it, at the disposal of a merchant or other person to carry cargo for an agreedupon sum.

to run a pipe through a wellbore to determine if it is open.

v: to lower the drill stem rapidly a few feet into the hole and then stop it suddenly with the drawworks brake. A surge of pressure in the mud in the drill stem and annular space results and may help to flush out debris accumulated in or on die pipe. The pressure surge may break down a formation, however, causing lost circulation, or may damage the bit if it is near the bottom.

v: Landing the drill string speedily and then braking. This operation can produce stiring pressure to clean the cutting laying up in the drill pipe. But this pressure may lead to formation fracturing or circulation loss.

v: to clean and deburr the threads of a pipe so that it will make up properly.

n: The operation that cut down a part of joint and make new thread due to severe wornout of thread.

any of many types of conglomerates.

n: a length of pipe fitted over a wrench handle to increase the leverage of the wrench. Use of a larger wrench is usually preferred. Also called a snipe.

n: A pipe used to increase arm of force. Installed in the wrench or pipe tongs.

a length of pipe used on a wrench to extend the leverage. (HSE risk).

v: Check the length of the upper casing.

n: a device for measuring gas throughput, usually installed in conjunction with the primary measuring device owned and operated by the party having the obligation to provide measurement services at a specific point on a pipeline system.

n: The sample acquired by standard method in checking drill fluid material.



© ۱۳۹۲-۱۳۹۷ این اثر شامل قانون حمایت از مولفین بوده و هرگونه کپی برداری از آن ممنوع است.